The search for the best wet tile saw is usually a tedious one because you have to consider the build quality, portability, functionality and very importantly, price. You can walk into a local hardware store but that would not make the choice any easier, as you would be met with different appliances that look very alike, with very different product descriptions. To ensure that you make the right choice, we have helped narrow your choices to the 5 best saws available on sale.
We picked the following saws after carefully analyzing reviews from other owners and users, and even went as far as putting the saws to the test ourselves. Looking for the right saw for your indoor and outdoor trims and cuts, then read on, but we got a lot of idea about wet tile saws from all over.
The Summary
A glance at why the following survived the cut for this list.
1. The 10 Inch Heavy Duty Dewalt D24000S with sturdy stand and 10-inch DEWALT DW4761 wet cutting for tile or ceramic
- Weighing just under 70 pounds. It is relatively lightweight and as such easy to setup.
- It improves material cutting and prolongs life as a result of the extended diamond matrix.
- Seamless chip-free cutting due to its continuous rim design.
- Has a rubber top on the table as an added security feature, to prevent slipping and sliding.
2. The 7 inch Delta 96-107 Cruzer
- Easy cut through man-made tiles and natural stones as a result of the powerful 13 amp motor.
- Cuts through stones effortlessly with its 7-inch diamond cutting wheels.
- Heavy-duty rail system to ensure smooth, straight and accurate cuts.
3. The MK Diamond 7 Inch Saw
- It comes fitted with a durable anti-rust water reservoir that would not peel off during or after use.
- 7-inch wide bench saw.
- Ultra lightweight, weighing in at around 15 pounds.
- One year warranty
4. SKIL 3550 with Hydrolock Water Containment Technology
- Straight, accurate cuts as a result of an adjustable rip fence and miter gauge.
- It is fitted with a durable, rust-proof aluminum tabletop.
- Gives a range of flexibility for cuts at angles 0, 22 1/2 and 45 degrees.
- The blade spins up to 3600 RPM.
5. The Porter Cable Saw– PCE980
- Fitted with a drain plug to allow the water to drain easily without mess into a bucket.
- The water splash during use is controlled with a splash guard.
- An on-board miter square helps line up cuts for accuracy and ease of use.
- A sliding slide extension allows for work to be done on much larger tiles and stones.
5 Best Wet Tile Saws in 2020
A detailed look at why you should put your money on one or more of the following tile, stone and porcelain cutters.
1. The 10 Inch Heavy Duty Dewalt D24000S with sturdy stand and 10-inch DEWALT DW4761 wet cutting for tile or ceramic
Pros:
- It is relatively lightweight, as the whole system weighs about 69 pounds and can be moved and set up easily.
- It achieves stability with its stainless steel rollers and ensures accurate cuts with the cut line indicators fitted.
- It allows for quick angled cuts at 22.5 and 45 degrees with its dual nozzles.
- Chip-free cutting as a result of the continuous rim design provided.
Cons:
- Although light, there are lighter saw options
- Even though it does its job and does it well, it is is a pricier option compared to the others on the list.
- The blade build quality is not the best, there are much better options on sale.
Our 2 cents:
The DEWALT saw is premium build and with the instruction of use followed to the letter delivers are required. With straight and accurate cuts, this is a good choice for beginners looking to dabble into DIY home renovations.
2. The 7 inch Delta 96-107 Cruzer
Pros:
- Powerful 13 amp motor to handle all cuts and trims effortlessly.
- Weighing in at just 69 pounds, it is relatively lightweight and can be easily manoeuvered and setup anywhere for use.
- The saw is engineered with a heavy-duty rail system that comes fitted with 12 bearings that see to it that you have straight, smooth cuts.
Cons:
- With no drains fitted, draining the water after use might be a laborious task.
- Although lightweight, other saws would work almost as fine and would at the same time be lighter.
Our 2 cents:
The delta brand has been suiting the needs of craftsmen for over 100 years. They have perfected the art of achieving so much even by doing so little. This efficiency can be noticed in their machines and appliances, with this being no different. With its simple, user-friendly interface, all your cuts would be done seamlessly and effortlessly.
3. The MK Diamond 7 Inch Saw
Pros:
- You have all the power you need with about 1/3 Horsepower (250W)
- The blade rotates at about 5500 RPM.
- It is the ultimate lightweight option, at only 15 pounds.
- The saw can easily cut through tiles 2 inches thick and 12 inches long.
Cons:
This piece of equipment is surprisingly loud.
The water pump runs continuously even when the blade is not in use.
Our 2 cents:
This is the perfect DIY machine, with its lightweight and precision cut technology, this is one saw you need to have in your garage. Fitted with 1/3 horsepower, you have more than enough power to cut through floor tiles and countertops. With its adjustable rip guide and durable water pump, you would be getting the best value for your money spent.
4. SKIL 3550 7 with Hydrolock Water Containment Technology
Pros:
- It prevents chipping as it confines the water to run on the blade with its water containment technology.
- It allows you to work on ties up to 18 x 18 inches with its slide-out extensions.
- The tabletop is made with durable, anti-rust aluminum.
- It allows for clean cuts with the blade rotating at about 3600 RPM.
Cons:
- The tile saw cuts from below and could cause your tiles to chip during cuts.
- Due to the design of this tile saw, you would need to push down on the tile which results in not so clean cuts.
Our 2 cents:
Compared to the other saw options, this is relatively cheaper. Also, it is ideal for beginners looking to do some minor cuts and fixes once or twice a year and not so right for professional tricky cuts.
5. The Porter Cable – PCE980
Pros:
The Porter Cable comes fitted with a drain plug that allows you to drain the water off your workstation into a bucket without causing a mess.
The appliance’s tool operators are protected from all the water with a splash guard.
It is durably made with its stainless steel tabletop.
Cons:
- The major problem with this unit is that the table is not properly aligned with the blade, which causes the tile to chip and results in not so perfect cuts
- Other people that have at one point used this saw complain of inadequate customer support.
Our 2 cents:
For clean, smooth and accurate cuts for materials ranging from porcelain, stone and ceramic tiles, this is the ideal men’s go-to tile saw. With a ONE horsepower motor providing you with all the power you would need to do all your construction and fixing bits effortlessly. This durably constructed machine has a cutting capacity of 12 inches by 12 inches. With a 90-day money-back guarantee, a one-year free service contract and a 3-year warranty. You can not go wrong with this purchase!
The Important Components
As a beginner, there are a few things you need to understand about these saws to ease you into their usage. To avoid chipping and damaging your precious tiles, ceramics or porcelain, or bringing harm to yourself and other people closeby.
The Miter Gauge: Most table and band saws come fitted with miter gauges, and these important add-ons help you hold the material being cut in place, at a specified angle, so you can cleanly cut through without any errors or mishaps.
The Tabletop: This is often an overlooked part of the appliance, but the build quality can affect the end product of your project. It is important that the tile saw you by either has a rubber top for stability or rustproof materials like Aluminum and stainless steel for durability and longevity of your equipment.
The Drain Mechanism: One of the biggest downsides to working with these saws is the mess brought about by the water and the debris gathered. If the equipment bought does not have a proper drain mechanism, you risk messing up your workstation and and the quality of work done would be affected in the long run.
The Blade: By far the most importance piece in the assemble. The quality of the blade would by a long margin decide the quality of your cuts. Regardless of your skill and experience, if you are working with a blade that is not built just right, you are going to end up chipping your tiles and ceramics. And could end up hurting yourself in the process.
The Motor: The blade quality would not matter much if you do not have a powerful motor to drive it. It is advised that you get one with at least 1/3 Horsepower and maybe not more than 1.5 Horsepower, depending on how much cutting you would be doing and what material you would be cutting.
Safety Tips:
Beginner or professional, it does not matter. Before you are ready to use heavy appliances like this, there are some rules or rituals you have to follow. Some practices that would ensure your safety and the safety of your family and friends either in use or not in use.
When Not In Use
- To avoid shock and accidental cuts to yourself and others, make sure to have the appliance unplugged from the mains.
- Store safely. Avoid putting it carelessly, keep away from water or moisture, and always keep covered to keep it away from dust.
- Oil the moving parts to avoid rust and to ensure the machine keeps working efficiently.
When in Use
- You should always have work gloves and safety goggles on when operating on the saw.
- Be sure to check and double check your measurements before using the saw.
- Be sure to have a face mask on, to avoid getting debris from the cuts in the air finding their way to your lungs.
- Be sure to have all the different moving parts tightly fitted, so they do not come off when in use.
- Keep in mind the limitations of the saw, so you do not end up overworking and overloading the equipment.
Best Tile Saw:
The DEWALT 24000s
This is one of the priciest options on the list. And for very good reason, this equipment is constructed from the best material. The blade, table and motor are of superior build and would stand the test of time. You have the option to choose one or more of three blades that are just right for cutting either tile, ceramic or porcelain.
With a tray that is 35 inches long and 25.5 inches wide, you have more than enough space to manoeuver your material for straight and 45 degree cuts. At just 69 pounds, it is lightweight and as such mobile and very easy to set up.
SO, are you a beginner looking to do some minor home renovations or maybe a professional, looking to work at home and in need of a state of the art equipment that can work just fine, lightweight and with superior build quality? Then look no further than the DEWALT 24000s.
If you are working on other home improvement projects and would need help selecting one or more tools that are just right for the job, proceed to explore the site to discover other interesting finds.
